LightWave Wall Mount Fiber Enclosures

Wall-mount patch enclosures are designed for direct termination of up to 96 fibers. The WAC series accommodates up to 8 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control.

WAC-1X (6.5"x1.5"x7")
The WAC-1X holds 1 fiber adapter panel and is used for wall mount applications. When unit is shut, it can be locked with a 1" keyed barrel lock for added security. Grommets at the top and bottom allow user to enter main enclosure. The side swinging door makes termination a snap. Black powder coat finish.

WAC-2X (13"x3.6"x9.2")
The WAC-2X holds 2 fiber adapter panels and is used in wall mount applications. Like the WAC-1X, this unit can be locked when shut using a 1" keyed barrel lock. Grommets at top and bottom allow access to main enclosure and wire management is simple with included spools. Door can be swung open sideways. Black powder coat finish. Spools and cable tie down bracket included.

WAC-4X (13"x3.5"x11.5")
The WAC-4X can be loaded with 4 adapter panels and is used in wall mount applications. Can be locked with 1" keyed barrel lock and has grommets at top and bottom for easy access to the main enclosure. Side swinging door included to allow user to run cables to final destination. Black powder coat finish. Spools and cable tie down bracket included.

WAC-8X (17"x5.9"x12.2")
The WAC-8X holds 8 fiber adapter panels and is used in wall mount applications. Side swinging door allows easy access to the fiber cables and blank panel is included that locks into the assembly behind the door (shown on bottom of picture). Black powder finish. Spools and cable tie down bracket included.